| 1. | Numerical simulation of cutting pattern of a reciprocating cutter
收获机械往复式切割器切割图的数值模拟与仿真 |
| 2. | Simulation study on cutting patterns for longitudinal - axial - roadheader in drilling
纵轴式掘进机钻进工况切屑图模拟研究 |
| 3. | An algorithm for double opposite layout of cutting patterns based on genetic algorithm
基于遗传算法的冲裁件对头双排算法 |
| 4. | Cutting pattern finding has three procedures : cutting lines obtainment , curve surface into plane and tension force release
对于裁剪线的确定，本章采用了曲面的最短线?测地线。 |
| 5. | Dual usage : plotting pattern and marker less than 1 . 6m and cutting pattern papers in 0 . 06 - 0 . 13mm thickness
一机两用，即可以绘制样板及幅宽1 . 6米以下的排料图，也可以切割厚度为0 . 06至0 . 13mm的纸样 |
| 6. | The first step is form finding ; the second is load analysis ; the last step is cutting pattern design . the first and the last step are the most important
第一阶段是找形设计阶段；第二阶段是荷载分析阶段；第三个阶段是裁剪分析阶段。 |
| 7. | Management ensures the execution of centralized batch cutting and optimal algorithms are responsible for the supply of the best cutting pattern and decision support information for planning , scheduling and materials departments
即由生产管理保证“集中下料”模式的实施，优化排样方法提供最省料的方案，同时为计划、调度、材料库存提供决策支持信息。 |
| 8. | The third part is cutting pattern finding . in this section , the whole surface of membrane structures is divided into several membrane strips . then the strips are developed into plane to get the cutting pattern on the membrane roll
第三阶段是裁剪设计阶段，其目的是将已经通过荷载分析的三维膜曲面转化成离散的平面膜片，在市售的薄膜卷材上进行下料分析，获得可以施工的裁剪下料图。 |
| 9. | The generation of the tool path means that by the geometrical models of parts , according to the adopted machines , the tools , the cutting patterns , the cutting allowance and etc . , under some principles , the calculation of the cutter location was done and the tool path was generated
刀具轨迹的生成是指通过零件几何模型，根据所选用的加工机床、刀具、走刀方式以及加工余量等，按照一定的导动规则进行刀位计算并生成加工运动轨迹。 |
